Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Enter the Radio Code in Toyota Vehicles?

Model: Toyota Toyota Various
Part: Warning light – error code

Video tutorial

The author of this video shows us how to enter the unlock code for the car radio in a Toyota vehicle. When you turn on the car radio and see the message "SEC" on the display, press the "Sync" button and the button with the number 1 simultaneously so that the radio allows you to enter the unlock code.

This code consists of three digits and can be entered using the first three numbered buttons (1, 2, 3) on the radio. Use button 1 to enter the first digit, button 2 for the second, and button 3 for the third.

Press the corresponding button as many times as the value of the digit in the radio code you need to enter. When finished, hold the "scan" button for a few seconds and then restart the radio.


Updated on 25 July 2026 by ScegliAuto


Related tutorials

Resetting the Car Radio on a Toyota Prado
Resetting the Car Radio on a Toyota Prado
Toyota Toyota Various In this video, you can see how to reset the radio on a Toyota Prado in case of disconnection due to a flat car battery; follow these simple steps: fi…
How to set the clock of the Toyota Echo
How to set the clock of the Toyota Echo
Toyota Toyota Various Today we will explain how to set the time on the radio of the Toyota Echo car model from 2000 to 2003. To perform this simple operation, we need to t…
How to turn off the engine light on a Toyota vehicle
How to turn off the engine light on a Toyota vehicle
Toyota Toyota Various In this video, see three methods to turn off the engine light. The first is using an OBD11 device and our EOBD (European On Board Diagnostic) socket.…

    Frequently Asked Questions

    • Toyota Vari - Why did the "AFS OFF" light come on in the Toyota Harrier? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos