Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Car Radio on a Toyota Prado

Model: Toyota Toyota Various
Part: Warning light – error code

In this video, you can see how to reset the radio on a Toyota Prado in case of disconnection due to a flat car battery; follow these simple steps: first, get into your vehicle, turn on the ignition, and then the car radio display; at this point, you will see the word SEC on the radio display. Now you need to enter the last three digits of your VIN (HOLD BOTH THE TUNE BUTTON AND BUTTON 1 SIMULTANEOUSLY). You can find the number on a metal plate under the bonnet, on the front windscreen, externally on the driver's side, or inside the door. Once you have found the number, simply enter the three digits as shown in the video and press the SCAN button. Turn on the car radio to check its proper functioning.

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Trip Meter on a Toyota Prado?
How to Reset the Trip Meter on a Toyota Prado?
Toyota Toyota Various To reset the trip meter on a Toyota Prado, insert the ignition key into the corresponding lock to turn on the dashboard: once activated, locate the O…
How to Reset the Trip Meter on a Toyota Prado
Toyota Toyota Various To reset the Trip B meter on the dashboard of your Toyota Prado, follow these steps. The entire operation takes just a few seconds to complete. First…
How do you deactivate the parking sensors of the Toyota Prado?
How do you deactivate the parking sensors of the Toyota Prado?
Toyota Toyota Various It will be possible to deactivate the parking sensors of the Toyota Prado by turning on the instrument panel, inserting the ignition key into the cor…

    Frequently Asked Questions

    • Toyota Vari - Why did the "AFS OFF" light come on in the Toyota Harrier? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos