Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on the Toyota Aygo 2

Model: Toyota Aygo Ab40, MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tire pressure warning light

See other generations:
Video tutorial

If you own a Toyota Aygo second series (2014-2023) and want to learn how to manually reset the tyre pressure warning light, follow these steps. First, insert the key and turn on the vehicle's ignition.

At this stage, it is not necessary to start the engine. Next, open the glove compartment and locate the "Set" button, holding it down until the light on the cluster turns off. Finally, release the "Set" button, and the tyre pressure monitoring system (TPMS) reset procedure is successfully completed.


Updated on 25 July 2026 by ScegliAuto


Related tutorials

How to reset the tire pressure warning light on the Toyota Aygo X.
How to reset the tire pressure warning light on the Toyota Aygo X.
Toyota Aygo (2021-2026 / MK 3, Aygo X) These brief and simple steps will allow us to reset the tire pressure warning light on the Toyota Aygo X after restoring the pressures on all four ti…
How to Reset the Tyre Pressure Light on the Toyota Aygo?
How to Reset the Tyre Pressure Light on the Toyota Aygo?
Toyota Aygo (2005-2014 / Ab10, MK 1) To reset the tyre pressure light on the Toyota Aygo, first ensure all tyres are inflated to the recommended pressure: the recommended pressure value …
How to reset the tyre pressure warning light on the Toyota Aygo?
How to reset the tyre pressure warning light on the Toyota Aygo?
Toyota Aygo (2014-2023 / Ab40, MK 2) To reset the tyre pressure warning light on the Toyota Aygo, first inflate the tyres to the recommended pressure value, which is indicated on the sti…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos