Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Rav 4
    4. : How to reset the tire pressure warning light in the Toyota RAV4?

Toyota Rav 4 - Video tutorial

Model: Toyota Rav 4 Xa40, MK 4 - Years 2013-2018
Part: Tires
Operation: How to reset the tire pressure warning light in the Toyota RAV4?

In this tutorial, we can see how to reset the tire pressure warning light in the Toyota RAV4, an extremely simple and quick operation to be carried out only after restoring the correct pressure of each tire following the instructions in the manual. First of all, we position ourselves inside the car, then we turn on the dashboard and locate the button depicting the same warning light icon located below the dashboard, on the driver's side. At this point, we press and hold the button for the necessary time until the warning light starts flashing and then disappears completely.


Posted on 18 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Rav 4 2013-2018 - When does the tire warning light illuminate on the Toyota RAV 4? Read Answer
    • Rav 4 2019-2026 - Tire warning light on Toyota Rav 4, what to do? Read Answer
    • Rav 4 2013-2018 - Tire warning light reset on Toyota Rav4 Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos