Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the rev counter on the Toyota Yaris?

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Checks and maintenance

See other generations:
Video tutorial

To install the rev counter on the Toyota Yaris, you need to remove the protective panel located in the lower left part of the dashboard, near the fuse box inside the cabin: once this panel is removed, you will be able to locate the appropriate connectors to which the rev counter needs to be connected.

Once all connectors are inserted, you can secure the rev counter to the windscreen pillar and hide all cables under the corresponding plastic coverings; then you can start the engine to check that the rev counter functions correctly.


Updated on 1 August 2026 by ScegliAuto


Related tutorials

How to Install Cruise Control on a Toyota Yaris
How to Install Cruise Control on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) To install cruise control on a Toyota Yaris, first disconnect the vehicle's battery. Then, go inside the cabin and remove the cover of the steering c…
How to reset the service light on the Toyota Yaris
How to reset the service light on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) In this new guide you will find the description of all the steps necessary to complete the manual reset of the service light of your third generation…
How to Install the Cruise Control Device on the Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) To install the cruise control device on the Toyota Yaris, loosen the screws that secure the steering wheel to its housing: there are two screws locat…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2011-2019 - Can I replace the ignition switch on my Toyota Yaris myself? and how much is it? Read answer
    • Yaris 2020-2027 - What problems does the 2020 Toyota Yaris Hybrid have? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos