Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Shock Absorber on the Toyota Calya

Model: Toyota Calya MK 1 - Years 2016-2023
Part: Shocks

To replace the front shock absorber on the Toyota Calya, you need to lift the car so you can loosen the bolts that secure the corresponding wheel: by removing it, you will have access to the screws that secure the shock absorber at the bottom. After these have been unscrewed, open the hood to loosen the screws at the top of the shock absorber. The part can now be removed and replaced with a new one; it should be positioned and secured with the appropriate screws.

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper of the Toyota Calya
How to Remove the Front Bumper of the Toyota Calya
Toyota Calya (2016-2023 / MK 1) This guide shows you how to remove and replace the front bumper of the Toyota Calya, following the instructions below. First, open the hood and start…
How to Replace the Cabin Air Filter in the Toyota Calya?
How to Replace the Cabin Air Filter in the Toyota Calya?
Toyota Calya (2016-2023 / MK 1) In this tutorial, you will see how to replace the cabin air filter in the Toyota Calya, a very simple and quick operation. First, sit in the passenge…
How to Change the Engine Oil in a Toyota Calya?
How to Change the Engine Oil in a Toyota Calya?
Toyota Calya (2016-2023 / MK 1) To change the engine oil in a Toyota Calya, access the underside of the vehicle, near the engine compartment: here you will find the oil drain plug, …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos