Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Suspension Wishbone

Model: Toyota Auris E150 - Years 2007-2012
Part: Suspension system

If the support bushes of the suspension wishbone fail, you can remedy this with a wishbone repair kit, which includes the two silent blocks and the ball joint, or you can opt for a complete wishbone replacement: in any case, you will need to remove the wishbone. Lift the vehicle on a ramp and remove the front wheel; then undo the nut securing the ball joint to the hub support and use a fork puller to detach it; next, move on to the fixing bolts of the wishbone bushes to the engine cradle to complete the removal and proceed in reverse for the installation of the new one.

Updated on 19 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Wiper Blade on a Toyota Auris
Removing the Wiper Blade on a Toyota Auris
Toyota Auris (2012-2018 / E180) Want to replace the wiper blade on your Toyota Auris? Let's remove the wiper blade for replacement. Take the front wiper (to be replaced) in your han…
How to replace the rear windshield wiper of the Toyota Auris
How to replace the rear windshield wiper of the Toyota Auris
Toyota Auris (2012-2018 / E180) In a few simple steps, we will see the procedure that will allow us to disassemble and replace the rear windshield wiper or rear wiper blade of the T…
How to Replace the Windscreen Wiper Blades on the Toyota Auris?
How to Replace the Windscreen Wiper Blades on the Toyota Auris?
Toyota Auris (2007-2012 / E150) To replace the windscreen wiper blades on the Toyota Auris, lift the wiper arms so that they are not in contact with the windscreen. Now, tilt the bl…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos