Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob of the Toyota RAV4

Model: Toyota Rav 4 Xa50, MK 5 - Years 2019-2026
Part: Shift knob

In this brief guide, you will learn how to remove and replace the gear knob of the Toyota RAV4. First, get in the vehicle and start by releasing the tab located behind the gear knob using a flat screwdriver; then pull the knob upwards to detach it from the lever, as shown in the video. Next, install the new gear knob, ensuring it is securely fastened to the lever with the appropriate clips; also attach the knob to the gear gaiter, following the video tutorial to the end!

Updated on 11 August 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Gear Knob of the Toyota Rav 4?
Toyota Rav 4 (2019-2026 / Xa50, MK 5) To replace the gear knob of the Toyota Rav 4, detach the clips securing the leather gaiter to the knob itself. Once the gaiter is detached, lower it …
How to Remove the Gear Knob on Toyota RAV 4
How to Remove the Gear Knob on Toyota RAV 4
Toyota Rav 4 (2000-2006 / Xa20, MK 2) Is the gear knob on your Toyota RAV 4 damaged? Here’s how to replace it inside the car. Take the knob in your hands and turn it to the left until you…
How to Replace the Automatic Gear Knob on a Toyota RAV 4?
How to Replace the Automatic Gear Knob on a Toyota RAV 4?
Toyota Rav 4 (2019-2026 / Xa50, MK 5) To replace the automatic gear knob on a Toyota RAV 4, lower the leather gaiter from its top. This will allow you to remove the securing pin located a…

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos