Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Yaris Cross
    4. : How do you recharge the starter battery of a Toyota Yaris Cross?

Toyota Yaris Cross - Video tutorial

Model: Toyota Yaris Cross MK 1 - Years 2020-2024
Part: Battery
Operation: How do you recharge the starter battery of a Toyota Yaris Cross?

In this video, we see how to recharge the starter battery of the Toyota Yaris Cross. In fact, our YouTuber accidentally left the "ready" light on, so the battery (let's continue to call it that and continue to call it the "starter battery") has been drained. However, surprise: we open the front hood and the battery as we know it is not there. Instead, there is a red-colored positive terminal, and any exposed bolt or the small bolt inside the fuse box can serve as the negative terminal. From here, we can recharge the battery, but it must be done with a slow charge.


Posted on 29 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Yaris Cross 2020-2027 - Where is the battery located in the Toyota Yaris Cross? Read Answer
    • Yaris Cross 2020-2027 - How long does the Yaris cross traction battery last? Read Answer
    • Yaris Cross 2020-2027 - Where is the battery located in the Toyota Yaris Hybrid Cross? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos