Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Charge the Battery of a Toyota Yaris Cross

Model: Toyota Yaris Cross MK 1 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Battery

Video tutorial

To charge the battery of a Toyota Yaris Cross, open the bonnet and locate the battery in the engine bay. Before starting, ensure the vehicle is completely off. Connect the charger to the terminals: first the red cable to the positive (+) terminal and then the black cable to the negative (-) terminal or to a ground point on the chassis.

Set the charger to 12V mode with an amperage suitable for the battery's capacity.

Start the charging process and wait for the cycle to complete as indicated by the device. Once finished, turn off the charger and disconnect the black terminal first and then the red.


Posted on 14 February 2026 by ScegliAuto


Related tutorials

How to charge the 12V battery of the Toyota Yaris Cross.
How to charge the 12V battery of the Toyota Yaris Cross.
Toyota Yaris Cross (2020-2026 / MK 1) In this brief guide, we will see the instructions that will allow us to recharge the battery of the Toyota Yaris Cross in simple and quick steps. To …
How to Charge the Starter Battery of a Toyota Yaris Cross
How to Charge the Starter Battery of a Toyota Yaris Cross
Toyota Yaris Cross (2020-2026 / MK 1) In this video, you will learn how to charge the starter battery of a Toyota Yaris Cross. Our YouTuber accidentally left the "ready" light on, causing…
How to Charge the 12 Volt Battery of a Toyota Yaris Cross?
How to Charge the 12 Volt Battery of a Toyota Yaris Cross?
Toyota Yaris Cross (2020-2026 / MK 1) The battery of the Toyota Yaris Cross, in this case Hybrid, which powers the vehicle, noting that it is a 12 volt, may discharge for various reasons,…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos