Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter of the Toyota Prius

Model: Toyota Prius Xw30, MK 2 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Cabin air filter

See other generations:
Video tutorial

Briefly, here are the steps to remove and replace the cabin air filter of the Toyota Prius. First, get into the vehicle on the passenger side and open the glove compartment, unfastening it from the sides; then remove the plastic cover of the pollen filter, extracting the cartridge from its compartment, as shown in the video.

At this point, install the new cabin air filter, inserting it in the correct orientation; finally, reassemble the glove compartment, following the video tutorial to the end!


Updated on 24 August 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Air Filter on Toyota Prius 3
How to Replace the Engine Air Filter on Toyota Prius 3
Toyota Prius (2016-2023 / MK 3, Xw50) If you want to replace the engine air filter on your third-generation Toyota Prius yourself, carefully read the following guide and follow the steps.…
How to Replace the Air Filter on the Toyota Prius?
How to Replace the Air Filter on the Toyota Prius?
Toyota Prius (2016-2023 / MK 3, Xw50) To replace the air filter on the Toyota Prius, loosen the screw securing the protective panel located at the bottom of the driver's seat. Once this h…
How to Remove the Pollen Filter on a Toyota Prius
How to Remove the Pollen Filter on a Toyota Prius
Toyota Prius (2004-2009 / MK 1) This video shows how to remove the pollen filter on a Toyota Prius. Open the glove compartment and unclip the plastic guides located at the sides of …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos