Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2012 Toyota Avensis

Model: Toyota Avensis T270, MK 3 - Years 2009-2018
Part: Service warning light

Typically, the orange service light on your Toyota Avensis third generation (2009-2018) turns off automatically after the regular service is performed. If this does not happen, you must proceed with a manual reset, which takes only a few seconds to complete correctly. All you need to do is press and hold the button located to the left of the rev counter while turning on the ignition. Once the light disappears from the mini display, release the button, and the service light reset procedure for your 2012 Toyota Avensis is successfully completed.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Toyota Avensis
How to Reset the Service Light on a Toyota Avensis
Toyota Avensis (2009-2018 / T270, MK 3) With the instructions in this guide, you can manually reset the service light that appears on the instrument cluster of your Toyota Avensis. The enti…
How to Reset the Tyre Pressure Light on a Toyota Avensis?
How to Reset the Tyre Pressure Light on a Toyota Avensis?
Toyota Avensis (2009-2018 / T270, MK 3) To reset the tyre pressure light on a Toyota Avensis, turn on the ignition by turning the key in the ignition switch: once the dashboard is lit, scro…
How to reset the oil light on the 2013 Toyota Avensis
How to reset the oil light on the 2013 Toyota Avensis
Toyota Avensis (2009-2018 / T270, MK 3) To manually reset the engine oil light on your 2013 Toyota Avensis, simply follow these steps. First, make sure you have correctly changed the engine…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos