Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Rav 4
    4. : How to reset the oil service in the Toyota RAV4?

Toyota Rav 4 - Video tutorial

Model: Toyota Rav 4 Xa30, MK 3 - Years 2006-2013
Part: Engine oil
Operation: How to reset the oil service in the Toyota RAV4?

In this tutorial, we can see how to reset the oil service in the Toyota RAV4, an extremely simple and quick operation, to be performed only once all the required scheduled maintenance work has been completed. Let's start by going inside the cabin, then we turn on the instrument panel and, using the button located to the left of the dashboard, we reach the partial odometer "Trip A". Once we have done this, we restart the instrument panel while holding down the same button, releasing it only after the service interval has been correctly reset.


Posted on 1 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Rav 4 2006-2013 - How much engine oil is needed in the 2007 Toyota RAV4 D4D engine? Read Answer
    • Rav 4 2006-2013 - What amount of oil does the 2008 Toyota Rav 4 need? Read Answer
    • Rav 4 2019-2026 - How much engine oil goes into the Toyota Rav4? Read Answer
    • Rav 4 2006-2013 - What is the right amount of engine oil for the Toyota Rav 4 2.2 diesel? Read Answer
    • Rav 4 2013-2018 - How much engine oil does the Toyota RAV4 2.0 diesel contain? Read Answer
    • Rav 4 2006-2013 - How much engine oil for Toyota Rav4 with 2.0 petrol engine? Read Answer
    • Rav 4 2013-2018 - How many liters of engine oil do I need for my Totora RAV 4 2.0 diesel? Read Answer
    • Rav 4 2006-2013 - How many liters of oil go into the 2006 Toyota RAV 4 engine? Read Answer
    • Rav 4 2006-2013 - How much oil does the Toyota Rav4 engine contain? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos