Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on a Toyota Venza?

Model: Toyota Venza MK  1, Av10 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Clock

See other generations:
Video tutorial

To set the clock on a Toyota Venza, turn on the instrument panel by rotating the key in the ignition switch. Once the panel is on, press and hold the INFO/CLOCK button located on the center control panel.

The hours will start blinking, and you can modify them by pressing and holding the RESET button. Then, press the INFO/CLOCK button again and hold the US/M button to adjust the minutes just like you did for the hours.


Updated on 31 August 2026 by ScegliAuto


Related tutorials

How do you set the clock on the Toyota Venza?
How do you set the clock on the Toyota Venza?
Toyota Venza (2008-2017 / MK  1, Av10) You can change the clock on the Toyota Venza by first turning on the instrument panel by inserting the ignition key into the corresponding slot. Once…
How to Reset the Service Light on the Toyota Venza 2
How to Reset the Service Light on the Toyota Venza 2
Toyota Venza (2020-2026 / MK  2, Xu80) To complete the manual reset of the service light on the instrument cluster of your second generation Toyota Venza, follow the steps outlined in this…
How to Replace the Remote Battery on a Toyota Venza
How to Replace the Remote Battery on a Toyota Venza
Toyota Venza (2020-2026 / MK  2, Xu80) To replace the remote battery on a Toyota Venza, pull the key out of its housing by using the lever located at the top of the device: this way, the k…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos