Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Avensis
    4. : What is the fuse diagram for the Toyota Avensis?

Toyota Avensis - Video tutorial

Model: Toyota Avensis MK 3, T270 - Years 2009-2018
Part: Fuse box
Operation: What is the fuse diagram for the Toyota Avensis?

If the devices in our Toyota Avensis have suddenly stopped working, we can first check the status of the corresponding fuses, the diagrams of which are indicated in this video. The first box is located inside the cabin, precisely in the lower left area of the dashboard on the driver's side. The second box is instead positioned inside the engine compartment, protected by the black plastic cover next to the filter box. In case of a blown fuse, make sure to use a replacement with equivalent specifications and operate with the vehicle turned off to avoid causing damage.


Posted on 18 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Avensis 1997-2003 - Where are the Toyota Avensis Mk1 fuse boxes located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos