Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre warning light on the Toyota Prius?

Model: Toyota Prius Xw30, MK 2 - Years 2009-2015
Part:

In this tutorial, see how to reset the tyre warning light on the Toyota Prius, a very simple and quick operation to perform only after restoring the correct pressure in each tyre according to the instructions in the manual. First, enter the cabin, then turn on the ignition and locate the indicated button, which is located beneath the dashboard on the driver's side. At this point, press and hold the button for about 10 seconds, or for as long as it takes for the light to flash and then disappear completely.

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure warning light on the Toyota Prius?
How to reset the tyre pressure warning light on the Toyota Prius?
Toyota Prius (2016-2023 / MK 3, Xw50) On the Toyota Prius, the procedure to reset the tyre pressure warning light involves turning on the ignition and then navigating through the menu on …
How to Reset the Tyre Pressure Warning Light on a Toyota Prius?
How to Reset the Tyre Pressure Warning Light on a Toyota Prius?
Toyota Prius (2004-2009 / MK 1) To reset the tyre pressure warning light on a Toyota Prius, first inflate the tyres to the correct pressure. This value is indicated on the sticker a…
How to Reset the Tyre Pressure Warning Light on a Toyota Prius?
How to Reset the Tyre Pressure Warning Light on a Toyota Prius?
Toyota Prius (2009-2015 / Xw30, MK 2) To reset the tyre pressure warning light on a Toyota Prius, first inflate the car's tyres to the correct pressure: once the tyres are inflated, enter…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos