|
Do it yourself
| |||
| ||||
TPMS Reset on a Mitsubishi 4Runner
Model: Toyota 4runner
N280
- Years:
2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Video tutorial
Today, with this helpful video guide, you will see the step-by-step procedure to reset the TPMS light, which indicates tire pressure, on a Mitsubishi 4Runner, model produced from 2010 to 2023. Before performing this task, it is important to check the correct pressure of all four tires as specified by the manufacturer. This pressure is listed on a sticker located on the driver’s door pillar. Now, let’s go through the procedure. Start by turning the vehicle's ignition to the second position. Then, using the buttons on the right side of the steering wheel, navigate to the settings and select "Vehicle Settings." Next, choose the "TPMS" option and press and hold the center button on "Set Pressure." Now, all that’s left is to wait a few seconds for the tires to automatically calibrate.
Updated on 5 September 2026 by ScegliAuto
Related tutorials
Toyota 4runner
(2010-2024 /
N280)
In this brief guide, you will find instructions to reset the tire pressure light on a Toyota 4Runner. Before resetting the TPMS sensors, ensure that …
Toyota 4runner
(2010-2024 /
N280)
To eliminate the maintenance warning light without directly intervening on the vehicle, you must manually reset the light. First, turn on the ignitio…
Toyota 4runner
(2010-2024 /
N280)
In this tutorial we can see how to reset the service in the Toyota 4Runner, an extremely simple and quick operation, to be carried out only once all …
Other guides you may be interested in
|
How to Open the Hood of the BMW X3
Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.037
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
