Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Toyota 4Runner?

Model: Toyota 4runner N280 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

In this tutorial we can see how to reset the service in the Toyota 4Runner, an extremely simple and quick operation, to be carried out only once all scheduled maintenance work has been completed. First of all, let's go inside the cabin, then insert the key and turn on the instrument panel.

Next, reach the partial odometer "Trip A" using the long right button on the dashboard, turn off the panel, turn it on again while holding down the same button and keep it in position until the reset is complete.


Posted on 15 October 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Toyota 4Runner
How to Reset the Service Light on a Toyota 4Runner
Toyota 4runner (2002-2009 / N210) Let's briefly go over the procedure to reset the service light for routine oil change maintenance on a Toyota 4Runner. First, get inside the vehicle …
How to Reset the Service Light on a Toyota 4Runner?
How to Reset the Service Light on a Toyota 4Runner?
Toyota 4runner (2002-2009 / N210) As we can see in this tutorial, resetting the service light on a Toyota 4Runner is very simple. Of course, this procedure should only be performed af…
How to reset the "Service" light on a Toyota 4Runner?
How to reset the "Service" light on a Toyota 4Runner?
Toyota 4runner (2010-2024 / N280) To reset the "Service" light on a Toyota 4Runner, turn on the instrument panel without starting the engine. Use the controls on the steering wheel to…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos