Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Proace Verso
  6. : How do you reset the Service light on the Toyota Proace?

Toyota Proace Verso - Video tutorial

Model: Toyota Proace Verso MK 1 - Years 2016-2023
Part: Checks and maintenance
Operation: How do you reset the Service light on the Toyota Proace?

On the Toyota Proace, in order to reset the Service light, you need to press and hold the button with the icon of a wrench below the instrument panel while it is turned off. While still holding the button, you need to turn the key to turn on the instrument panel. This will initiate a countdown on the display starting from ten; once the countdown is complete, you can release the button completely to check if the Service light has disappeared. To verify the reset, simply turn off and turn on the instrument panel again.


Posted on 7 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Proace Verso 2016-2023 - What to do if I have problems with the AdBlue system of the Toyota Proace Verso? Read Answer
    • Proace Verso 2016-2023 - Has the Toyota Proace shown possible problems in the past? Read Answer
    • Proace Verso 2016-2023 - What does the AdBlue warning light on the Toyota Proace indicate? Read Answer
    • Proace Verso 2016-2023 - How do you reset the AdBlue warning light in the Toyota Proace? Read Answer
    • Proace Verso 2016-2023 - What does the AdBlue light on the Toyota Proace indicate? Read Answer
    • Proace Verso 2016-2023 - What does the AdBlue warning light on the Toyota Proace indicate? Read Answer
    • Proace Verso 2016-2023 - Where is the AdBlue tank located in the Toyota Proace? Read Answer
    • Proace Verso 2016-2023 - What problems does the Toyota Proace have? Read Answer
    • Proace Verso 2016-2023 - What problems could the Toyota Proace Verso present? Read Answer
    • Proace Verso 2016-2023 - Why did the AdBlue light come on in the Toyota Proace Verso van? Read Answer
    • Proace Verso 2016-2023 - How can you fix the AdBlue problem on Toyota Busty Verso? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos