Do it yourself
Frequently asked questions about cars and motorcycles

Wiring Diagram for the Window of a Toyota Yaris

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Checks and maintenance

This video shows the wiring diagram for the window of a Toyota Yaris. By interrupting the circuit, you will see the fuses for the main switch, the right window motor, the left window motor, and the rear window. When no button is pressed, both contacts in the main switch rest on the ground inside the switch. When you press the switch to raise the glass, the contact on the switch leaves the ground and connects to the power supply. This allows current to flow from the battery through the fuses, through the switch, through the contacts of the switch, and through the motor; then it returns to the battery's earth side. This raises the glass.

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Yaris (2005-2011 / Xp90) Today, learn how to remove and replace the window seal on the side window of a Toyota Yaris in simple steps; this operation can also be performed on …
Toyota Yaris (2005-2011 / Xp90) There are two fuse boxes in the 2008 Toyota Yaris, not just one. They contain all the fuses used in the vehicle, which are listed and described in th…
Toyota Yaris (2005-2011 / Xp90) In today's video tutorial, we will see the location of the internal fuse box and how to find the fuse diagram for the Toyota Yaris. First, get into t…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2020-2027 - What problems does the 2020 Toyota Yaris Hybrid have? Read answer
    • Yaris 2005-2011 - Where is the 2010 Toyota Yaris jack located? Read answer

How to Replace the Cabin Filter on the Opel Grandland X

If you own an Opel Grandland X and want to know the steps to replace the cabin air filter, carefully read the following guide and follow the described steps. First, enter the vehicle and go to the passenger side. Then, locate the box containing the air filter in the lower side area of the dashboard. Remove the cover of the box and finally replace the old filter with the new one. Refit the cover, and you are done.

Watch the video!


by ScegliAuto

More videos