Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Diagram and Layout for the Toyota Corolla 1.8 Hybrid

Model: Toyota Corolla MK 5, E210 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Fuse box

See other generations:
Video tutorial

Below are the diagram and layout of the fuses for the Toyota Corolla 1.8 Hybrid, following the instructions provided. First, open the bonnet and locate the external fuse box; you can find it by removing the plastic cover next to the battery, as shown in the video.

At this point, you will find another fuse box inside the cabin; the diagram and layout of the fuses are illustrated, which can also be found in the owner's manual where the codes and corresponding amperages of the fuses are listed!


Updated on 13 September 2026 by ScegliAuto


Related tutorials

Diagram and Positioning of the Internal Fuse Box of the Toyota Corolla
Diagram and Positioning of the Internal Fuse Box of the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) These brief and simple steps will show you how to access the internal fuse box of the Toyota Corolla, along with the diagram and layout. First, open …
Fuse Box Layout and Positioning in a Toyota Corolla
Fuse Box Layout and Positioning in a Toyota Corolla
Toyota Corolla (1995-2002 / MK 1) In this brief guide, we will see the positioning and layout of the fuse boxes in a Toyota Corolla. First, open the bonnet of the vehicle and start re…
Fuse box and fuse location of the Toyota Corolla.
Fuse box and fuse location of the Toyota Corolla.
Toyota Corolla (2006-2013 / MK 3) The following information will show us how to identify the layout and positioning of the fuse boxes of the Toyota Corolla. First, we get on board the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos