Do it yourself
Frequently asked questions about cars and motorcycles

How to do the service on the Toyota Corolla Hybrid

Model: Toyota Corolla MK 5, E210 - Years 2019-2026
Part: Checks and maintenance

In this video we see the highlights to give a very quick check-up on a Toyota Corolla Hybrid: with the hood open, we immediately see in front of us the air filter box, which is very easily removed simply with two clips on the sides: inside the filter is very small, so it is recommended to change it at every check-up: From under the car we remove the cap and let the oil drain well from the sump; of course in a container that we will then dispose of correctly at an authorized center. Then we will also change the cap and the gasket. In addition, next to it we have the filter, with the classic Toyota "V" that allows us to drain it without getting dirty (always in the same container) and we also change the filter. We put back the new and clean oil according to the manufacturer's instructions, 4.2 liters of SAE 0W20 oil +0.3 for the filter, we change the pollen filter, which is behind the glove compartment and finally the ventilation and cooling filter of the hybrid battery, which is located under the rear seat.

Posted on 12 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Toyota Corolla (2019-2026 / MK 5, E210) Let's see how to reset the service light on a Toyota Corolla Hybrid: with all doors closed, switch on the ignition, press the "ok" button located on …
Toyota Corolla (2019-2026 / MK 5, E210) In this tutorial, we can see how to reset the service in the Toyota Corolla Hybrid, an extremely simple and quick operation, to be carried out only o…
Toyota Corolla (2019-2026 / MK 5, E210) To replace the battery in a Toyota Corolla Hybrid, open the bonnet to access the components inside the engine bay. On the right side, you will find t…

Other guides you may be interested in

    Frequently Asked Questions

    • Corolla 2013-2019 - Why is the Toyota Corolla heater not working? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos