Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of a Toyota remote control?

Model: Toyota Toyota Various
Part: Key

Video tutorial

In this tutorial, you will see how to replace the battery of a Toyota remote control, a very simple and quick operation. To do this, you will need a small flat screwdriver and a replacement battery of type CR2016. First, locate the small slot on the inside of the lower ring, then insert the tip of the screwdriver, lever it open, and unlock the rear cover.

At this point, remove the old battery, insert the replacement ensuring the correct polarity, and reassemble everything by simply following the reverse procedure.


Updated on 25 September 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery on the Toyota Hilux
How to Replace the Key Fob Battery on the Toyota Hilux
Toyota Toyota Various This guide shows how to replace the battery of the key fob on the Toyota Hilux. To perform this operation, first slide out the physical key from the …
How to Change the Battery in My Toyota Remote Key?
How to Change the Battery in My Toyota Remote Key?
Toyota Toyota Various If you need to replace the battery in your Toyota key remote, this video will show you how. First, take your remote and press the button to release t…
How to replace the battery of the Toyota remote control
How to replace the battery of the Toyota remote control
Toyota Toyota Various Today we will explain how to replace the battery of the remote control for a Toyota Yaris and Auris. The steps are simple and quick to perform indepe…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos