Do it yourself
| ||||
|
Toyota Camry - Video tutorial
Model: Toyota Camry
Xv50
- Years 2011-2019 To remove the front bumper of a Toyota Camry, start by opening the front hood and locating the fastening screws that are located above the bumper, usually near the upper edge of the hood. Use a screwdriver or hex key to remove them. Make sure to carefully remove the screws with a screwdriver or hex key. Make sure to keep the screws and rivets in a safe place for reassembly. Once all the screws and rivets have been removed, check for fastening clips along the lower edge of the bumper and gently detach them. Finally, lift the bumper upwards and outwards to completely detach it from the car's frame. Pay attention to any sensor or light cables connected to the bumper and disconnect them carefully. Now the front bumper of your Toyota Camry has been removed and can be repaired or replaced as needed.
Posted on 28 April 2024 by ScegliAuto
Other guides that may interest you
|
How to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.043
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |