Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light on a Toyota Aygo

Model: Toyota Aygo MK 1, Ab10 - Years 2005-2014
Part: Tail light

First, open the rear boot lid, lift it, and remove the indicated bolt to take off the panel at the back of the light. Once the panel is lifted, unscrew the bolts securing the light. Carefully extract it from the back, ensuring to disconnect the connectors before fully removing it. Now, make the necessary replacements and retrace the steps for reassembling the components.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear light of the Toyota Aygo
How to disassemble the rear light of the Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) In this guide, we will see information related to disassembling and replacing the rear taillight and its bulbs of the Toyota Aygo. First, we open the…
Replacement of the rear light of the Toyota Aygo
Replacement of the rear light of the Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) Let's briefly see the instructions that will allow us to disassemble and replace the rear taillight of the Toyota Aygo, in simple steps. First, we op…
How to disassemble the rear taillight and its bulbs of the Toyota Aygo
How to disassemble the rear taillight and its bulbs of the Toyota Aygo
Toyota Aygo (2014-2023 / Ab40, MK 2) Following these brief and simple steps, we will see how to disassemble and replace the rear taillight and its bulbs of the Toyota Aygo. First of all,…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos