Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to connect the jump leads to the battery of a Toyota Yaris Hybrid

Model: Toyota Yaris MK 4 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Battery

See other generations:
Video tutorial

This video shows how to correctly connect the jump leads to restart the starter battery of a Toyota Yaris Hybrid: the positive terminal is located in the small triangular electrical box on the upper right side of the battery. Open the box and then open the positive connector to allow the clamp to attach.

The negative terminal for emergency starting is a ring located on the lower left side of the battery, where you can place the black clamp. As it is quite different from standard batteries, you need to be familiar with it to use it in an emergency.


Updated on 9 October 2026 by ScegliAuto


Related tutorials

Where is the Starter Battery Located on a Toyota Yaris Hybrid?
Toyota Yaris (2011-2019 / Xp130) The starter battery of the Toyota Yaris Hybrid is located inside the cabin, under the rear seat: to access it, you will need to detach the clips secu…
How to Start a Toyota Yaris Hybrid with a Flat Battery
How to Start a Toyota Yaris Hybrid with a Flat Battery
Toyota Yaris (2020-2026 / MK 4) Starting a Toyota Yaris Hybrid with a flat battery is simple, but different from a traditional car. You do not need to look for the 12-volt battery u…
How to start a Toyota Yaris Hybrid with a low starter battery
How to start a Toyota Yaris Hybrid with a low starter battery
Toyota Yaris (2020-2026 / MK 4) In this video we can see how to start a Toyota Yaris Hybrid with a dead battery: with the dead battery, even the remote control doesn't work, so we w…

    Frequently Asked Questions

    • Yaris 2011-2019 - How much does it cost to replace the batteries in the Toyota Yaris Hybrid in the UK? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos