Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Tyre Pressure on a Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

Thanks to this very brief video guide, you can see how to reset the maintenance light on a Toyota Yaris, third generation model produced from 2011 to 2019. The operation is very simple; first, turn on the ignition of the vehicle, then press and hold the reset button located under the dashboard on the driver's side until the tyre pressure light flashes three times and then turns off. Before performing this operation, it is necessary to check the correct pressure of all four tyres as indicated by the manufacturer.


Updated on 11 October 2026 by ScegliAuto


Related tutorials

Reset the Tyre Light on Toyota Yaris 2019
Reset the Tyre Light on Toyota Yaris 2019
Toyota Yaris (2011-2019 / Xp130) To reset the tyre light on the Toyota Yaris, turn on the ignition of your car. Next, find the SET button located at the bottom left side of the drive…
How to Reset the Tyre Pressure Warning Light on a Toyota Yaris?
How to Reset the Tyre Pressure Warning Light on a Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) To reset the tyre pressure warning light on a Toyota Yaris, first inflate the tyres to the correct pressure, as indicated on the sticker affixed to t…
How to Reset the Tyre Pressure Warning Light on the Toyota Yaris?
Toyota Yaris (2020-2026 / MK 4) To reset the tyre pressure warning light on the Toyota Yaris, first inflate the tyres to the correct pressure value, which is indicated on the sticke…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos