Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the Tyre Light on Toyota Yaris 2019

Model: Toyota Yaris Xp130 - Years 2011-2019
Part:

To reset the tyre light on the Toyota Yaris, turn on the ignition of your car. Next, find the SET button located at the bottom left side of the driver's side, below the steering wheel. Specifically, it is at the bottom of the driver’s side plastic, near the OBD port. Once you find the button, press it once and release. Immediately press it again and hold the button for a few seconds until the tyre light on the dashboard turns off. This way, you will have disabled the tyre pressure monitoring system.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light on the Toyota Yaris
How to reset the tire pressure light on the Toyota Yaris
Toyota Yaris (2020-2026 / MK 4) These short and simple instructions will show us the process of resetting the tire pressure warning light (TPMS) of the Toyota Yaris; before performi…
How to Reset the Tyre Pressure Light on a Toyota Yaris?
How to Reset the Tyre Pressure Light on a Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) Good morning, today’s goal is to reset the tyre light on our Toyota Yaris. Start by sitting in the driver’s seat of the car. Next, turn on the igniti…
Resetting the Tyre Pressure Light on the 2020 Toyota Yaris Hybrid
Resetting the Tyre Pressure Light on the 2020 Toyota Yaris Hybrid
Toyota Yaris (2020-2026 / MK 4) When the pressure in your tyres drops or you replace them, the tyre pressure sensor light will appear on the dashboard of your 2020 Toyota Yaris Hybr…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2020-2027 - What to do in case of tire warning light on Toyota Yaris? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos