Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre warning light on the 2017 Toyota Auris?

Model: Toyota Auris E180 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tire pressure warning light

See other generations:
Video tutorial

If the warning light for tyre pressures continues to illuminate on the instrument panel of your 2017 Toyota Auris despite there being no puncture, you need to follow this procedure to manually reset the light. First, enter the car from the driver's side, then turn on the ignition and open the glove compartment located on the passenger side.

At this point, locate the "Set" button and hold it down until the tyre light turns off. Finally, release the button, and the procedure is successfully completed.


Updated on 17 October 2026 by ScegliAuto


Related tutorials

How to reset the tyre warning light on the Toyota Auris?
How to reset the tyre warning light on the Toyota Auris?
Toyota Auris (2012-2018 / E180) In this tutorial, you will learn how to reset the tyre warning light on the Toyota Auris, a very simple and quick operation. Before proceeding, ensur…
How to Reset the Tyre Warning Light in a Toyota Auris?
How to Reset the Tyre Warning Light in a Toyota Auris?
Toyota Auris (2012-2018 / E180) In this tutorial, you will see how to reset the tyre warning light in a Toyota Auris, a very simple and quick operation. This procedure should only b…
How to Reset the Tyre Pressure Warning Light on a Toyota Auris
How to Reset the Tyre Pressure Warning Light on a Toyota Auris
Toyota Auris (2012-2018 / E180) This guide explains how to reset the tyre pressure monitoring system (TPMS) warning light on a Toyota Auris. Before performing the reset, ensure all …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos