Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Tyre Pressure Warning Light on a Toyota Corolla

Model: Toyota Corolla MK 5, E210 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

The steps outlined in this guide will show you how to reset the tyre pressure warning light on a Toyota Corolla. Before performing the reset, ensure that all four tyres are at the correct operating pressure.

Then, get in the vehicle and turn on the ignition by pressing the start button once. Next, press the TPMS reset button and wait for the light to flash until it completely resets on the instrument panel, as shown in the video.

Finally, turn off the ignition and start the engine!


Updated on 18 October 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on a Toyota Corolla
How to Reset the Tyre Pressure Warning Light on a Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) Today's guide will show you how to reset the tyre pressure monitoring system (TPMS) warning light on a Toyota Corolla. Before performing the reset, e…
How to reset the tyre pressure warning light on the Toyota Corolla Hybrid
How to reset the tyre pressure warning light on the Toyota Corolla Hybrid
Toyota Corolla (2019-2026 / MK 5, E210) Below are the steps necessary to reset the tyre pressure warning light on the Toyota Corolla Hybrid; before performing the reset, ensure all four tyr…
How to reset the tyre pressure warning light on the Toyota Corolla?
How to reset the tyre pressure warning light on the Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) To reset the tyre pressure warning light on the Toyota Corolla, first inflate the car's tyres to the recommended pressure value: this value is indica…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos