Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Coolant on Triumph Street Triple 675R

Model: Triumph Street Triple 675r
Part: Antifreeze coolant

Video tutorial

This guide shows how to bleed and replace the coolant and engine oil on a Triumph Street Triple 675R, following these simple steps. First, remove the lower fairing by unscrewing the fixing screws; now loosen the clamp on the radiator hose and remove the radiator to drain the coolant into a container.

At this point, open the coolant filler cap and fill to the maximum level (approximately 2 litres); start the engine to circulate the coolant, and top up if necessary!


Updated on 16 April 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Coolant on a Triumph Street Triple 675R
How to Change the Engine Oil and Coolant on a Triumph Street Triple 675R
Street Triple 675r These brief steps will guide you through performing routine maintenance by changing the engine oil and coolant on the Triumph Street Triple 675R. Fir…
How to Replace the Coolant of the Triumph Street Triple 675 R
How to Replace the Coolant of the Triumph Street Triple 675 R
Street Triple 675r Today, in this brief and simple guide, you will learn how to drain and replace the coolant of the Triumph Street Triple 675 R. First, place your bike…
How to replace the exhaust on the Triumph Street Triple 675R?
How to replace the exhaust on the Triumph Street Triple 675R?
Street Triple 675r To replace the exhaust on the Triumph Street Triple 675R, loosen the bolts that secure the exhaust at the rear of the unit, near the bracket. Next, l…

How to Set the Clock on a Yamaha NMAX 125 Scooter?

In this tutorial, you will learn how to set the clock on a Yamaha NMAX 125 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following the switch to daylight saving time. First, insert the key, then turn on the instrument cluster and press and hold the "MODE" button on the left control until the clock starts to flash. Next, adjust the hour by pressing the button quickly, hold it down to switch to minutes, and similarly adjust them before finally saving the setting.

Watch the video!


by ScegliAuto

More videos