Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Coolant on a Triumph Street Triple 675R

Model: Triumph Street Triple 675r
Part: Engine oil

Video tutorial

These brief steps will guide you through performing routine maintenance by changing the engine oil and coolant on the Triumph Street Triple 675R. First, place the motorcycle on a stand and begin unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge and replace it with a new one, as shown in the video.

Now drain and refill the coolant suitable for your radiator!


Updated on 20 September 2026 by ScegliAuto


Related tutorials

Replace the Coolant on Triumph Street Triple 675R
Replace the Coolant on Triumph Street Triple 675R
Street Triple 675r This guide shows how to bleed and replace the coolant and engine oil on a Triumph Street Triple 675R, following these simple steps. First, remove the…
Engine Oil and Oil Filter Replacement for Triumph Street Triple 675R
Engine Oil and Oil Filter Replacement for Triumph Street Triple 675R
Street Triple 675r This guide describes how to replace the oil and oil filter on a Triumph Street Triple 675R. Obtain 4 litres of Motul 7100 SAE 10W40 and a HIFLO HF204…
How to Replace the Battery on the Triumph Street Triple 675R
How to Replace the Battery on the Triumph Street Triple 675R
Street Triple 675r You can replace the battery on the Triumph Street Triple 675R by loosening the screws that secure the seat to its housing: once the seat screws are l…

How to Change the Engine Oil in a Triumph Speed Triple

In this tutorial, we will see how to change the engine oil in a Triumph Speed Triple, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely, then position a container underneath the bike, locate the drain plug, and unscrew it using a socket wrench. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the replacement and the plug. At this point, simply pour the necessary amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos