Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the exhaust on the Triumph Street Triple 675R?

Model: Triumph Street Triple 675r
Part: Exhaust muffler

Video tutorial

To replace the exhaust on the Triumph Street Triple 675R, loosen the bolts that secure the exhaust at the rear of the unit, near the bracket. Next, loosen the nut that secures the clamp connecting the exhaust pipe to the exhaust, allowing it to be completely removed.

Once the old exhaust has been fully removed, position the new one, securing it to the exhaust pipe with the clamp and fastening it to the rear bracket.


Updated on 15 June 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on the Triumph Street Triple 675R
How to Replace the Battery on the Triumph Street Triple 675R
Street Triple 675r You can replace the battery on the Triumph Street Triple 675R by loosening the screws that secure the seat to its housing: once the seat screws are l…
Replace the Coolant on Triumph Street Triple 675R
Replace the Coolant on Triumph Street Triple 675R
Street Triple 675r This guide shows how to bleed and replace the coolant and engine oil on a Triumph Street Triple 675R, following these simple steps. First, remove the…
How to Remove the Front Brake Lever on a Triumph Street Triple 675R
How to Remove the Front Brake Lever on a Triumph Street Triple 675R
Street Triple 675r Before you can start, position the motorcycle upright. Begin by loosening and removing the lower nut that secures the brake lever pin. Next, unscrew …

How to Change the Engine Oil in a Triumph Speed Triple

In this tutorial, we will see how to change the engine oil in a Triumph Speed Triple, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely, then position a container underneath the bike, locate the drain plug, and unscrew it using a socket wrench. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the replacement and the plug. At this point, simply pour the necessary amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos