Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Brake Lever on a Triumph Street Triple 675R

Model: Triumph Street Triple 675r
Part:

Video tutorial

Before you can start, position the motorcycle upright. Begin by loosening and removing the lower nut that secures the brake lever pin. Next, unscrew and remove the pin itself.

By doing this, you will have correctly freed the brake lever. At this point, unclip and extract the front brake lever from its housing.

Once you have completed this last step, you can finally remove the front brake lever from your Triumph Street Triple 675R, and the disassembly will be complete.


Updated on 1 May 2026 by ScegliAuto


Related tutorials

Replacing the Front Brake Pads on the Triumph Street Triple 675
Replacing the Front Brake Pads on the Triumph Street Triple 675
Street Triple 675r Follow the steps below to remove and replace the front brake pads on the Triumph Street Triple 675. First, place the motorcycle on a stand and start …
How to Replace the Brake and Clutch Levers on a Triumph Street Triple R
How to Replace the Brake and Clutch Levers on a Triumph Street Triple R
Street Triple 675r In this guide, we will see how to remove and replace the brake and clutch levers on the Triumph Street Triple 675 R motorcycle. First, place the stan…
Replace the Coolant on Triumph Street Triple 675R
Replace the Coolant on Triumph Street Triple 675R
Street Triple 675r This guide shows how to bleed and replace the coolant and engine oil on a Triumph Street Triple 675R, following these simple steps. First, remove the…

How to Change the Engine Oil in a Triumph Speed Triple

In this tutorial, we will see how to change the engine oil in a Triumph Speed Triple, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely, then position a container underneath the bike, locate the drain plug, and unscrew it using a socket wrench. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the replacement and the plug. At this point, simply pour the necessary amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos