Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake and Clutch Levers on a Triumph Street Triple R

Model: Triumph Street Triple 675r
Part:

Video tutorial

In this guide, we will see how to remove and replace the brake and clutch levers on the Triumph Street Triple 675 R motorcycle. First, place the stand on your motorcycle and begin by removing the front brake lever; to do this, unscrew the lever pin using two spanners, as shown in the video.

Then install the new lever of the correct type, making the necessary adjustments; follow the same procedure to replace the clutch lever, disconnecting the steel cable in this case, following the video tutorial to the end!


Updated on 25 May 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch on the Triumph Street Triple 675R?
How to Replace the Clutch on the Triumph Street Triple 675R?
Street Triple 675r You can replace the clutch on the Triumph Street Triple 675R by loosening the screws that secure the clutch cover, located on the right side of the b…
Replacing the Front Brake Pads on the Triumph Street Triple 675
Replacing the Front Brake Pads on the Triumph Street Triple 675
Street Triple 675r Follow the steps below to remove and replace the front brake pads on the Triumph Street Triple 675. First, place the motorcycle on a stand and start …
How to Remove the Front Brake Lever on a Triumph Street Triple 675R
How to Remove the Front Brake Lever on a Triumph Street Triple 675R
Street Triple 675r Before you can start, position the motorcycle upright. Begin by loosening and removing the lower nut that secures the brake lever pin. Next, unscrew …

How to Change the Engine Oil in a Triumph Speed Triple

In this tutorial, we will see how to change the engine oil in a Triumph Speed Triple, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely, then position a container underneath the bike, locate the drain plug, and unscrew it using a socket wrench. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the replacement and the plug. At this point, simply pour the necessary amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos