Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Follow these steps to replace the brake lever: this method applies to all types of motorcycles or scooters. Start by removing the lower screw of the lever with a screwdriver. Using the same tool, also remove the upper screw. This allows you to slide out the lever you intend to replace and fit the new one. The price of the replacement part may vary depending on the type of vehicle you are working on; for instance, a touring motorcycle will have different prices compared to a racing bike or a scooter. Simply refit the new part in place, starting with the upper screw, then the lower one. Tighten securely, but do not overtighten to avoid damaging the thread.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Scooter Battery and Motorcycle Spark Plug
How to Replace the Scooter Battery and Motorcycle Spark Plug
(Various brands) Various In this video tutorial, see how to replace the scooter battery and the motorcycle spark plug. To replace the scooter battery, obtain a suitable batte…
How to Replace the Brake Pads on a Scooter
How to Replace the Brake Pads on a Scooter
(Various brands) Various If you intend to replace the brake pads on your scooter yourself, you can find the instructions in the description below and refer to the video. Firs…
How to start a scooter that won't start
How to start a scooter that won't start
(Various brands) Various In this video we see how to start a scooter that doesn't want to start: it is something that can happen normally if the scooter has been stationary f…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos