Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Scooter Battery and Motorcycle Spark Plug

Model: (Various brands) Various
Part: Spark plugs

In this video tutorial, see how to replace the scooter battery and the motorcycle spark plug. To replace the scooter battery, obtain a suitable battery for your scooter. Open the seat, remove the battery cover by unscrewing the screw; disconnect the positive and negative terminals of the battery; remove the old battery and replace it with the new one, then reconnect all parts in reverse order. To replace the motorcycle spark plug, first, buy a suitable spark plug for your bike, referring to the user manual. Disconnect the spark plug cap, use the appropriate tool to unscrew the spark plug, blow with an air compressor to prevent dirt from entering the spark plug hole; take the new spark plug, screw it in by hand first, then use a torque wrench; reattach the cap and you’re done.

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plug on a Scooter?
How to Replace the Spark Plug on a Scooter?
(Various brands) Various The video tutorial for replacing the spark plug on a scooter applies to most models currently available on the market. As you can see, to change the …
How to Change the Spark Plug on the Piaggio Liberty 50
How to Change the Spark Plug on the Piaggio Liberty 50
(Various brands) Various If you want to proceed with replacing the spark plug on your scooter, you will find the instructions very simple as described below, and you can refe…
How to Replace the Spark Plug of the KXD PRO
(Various brands) Various Replacing the glow plugs of the KXD PRO is a straightforward task that you can perform independently, aided by our brief video tutorial. Place the mo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos