Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the engine cylinder head gasket?

Model: (Various brands) Various
Part: Cylinder head

In order to replace the cylinder head gasket of the engine, you need to open the hood, so you can locate the valve cover: this cover can now be removed from its seat by loosening the screws that fix it to its housing. Under the cover, the cylinder head will be present, which will be accessible after removing the valve seats and camshafts; now, by loosening the screws that fix the cylinder head, it will be possible to completely remove it so that the corresponding gasket can be removed. The new gasket can then be inserted, making sure that everything is functioning properly.

Posted on 27 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Maintain the Cylinder Head Gasket
How to Maintain the Cylinder Head Gasket
(Various brands) Various In this tutorial video, we can see how to maintain the cylinder head gasket. The engine can be divided into four parts: the upper part is called the …
How to tell if the engine head gasket is burnt
How to tell if the engine head gasket is burnt
(Various brands) Various How to identify and control if the cylinder head gasket is burnt? It is not certain that just because the vehicle is consuming water the fault lies w…
A check to determine if the head gasket is burnt.
A check to determine if the head gasket is burnt.
(Various brands) Various In this video we can see a simple way to determine if the head gasket is burnt or not. Certainly it will not be the only system and certainly there w…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos