Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to test the fan's resistance

Model: (Various brands) Various
Part: Blower motor

In this video, we can see how to perform the test to verify the functionality of the resistor that controls the cabin fan. Usually, a broken resistor has a break in the electrical circuit that can be checked using a multimeter that will help us verify the distance between the points marked in the video as "A" and "D". If you do not have a multimeter, a tester and a light bulb will be sufficient. We can see better in the electrical diagram that the YouTuber proposes to us; of course, it is necessary to have some basic knowledge of electronics to perform this test, but it will not be a problem if you are DIY enthusiasts.

Posted on 27 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Check the Operation of the Cabin Fan Resistor
How to Check the Operation of the Cabin Fan Resistor
(Various brands) Various In today's tutorial, you will see the test to perform to check the operation of the internal cabin fan resistor, applicable to most vehicles on the m…
How to Test the Cabin Heater Fan
How to Test the Cabin Heater Fan
(Various brands) Various In this video tutorial, you will learn how to test the cabin heater fan of a generic car. Heating issues are not always caused by the fan: therefore,…
How to test the radiator fan
How to test the radiator fan
(Various brands) Various If we have doubts about the radiator fan of our car being defective, we can follow this video, which will guide us through a simple system to test it…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos