Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you install the telepeage badge on our car?

Model: (Various brands) Various
Part: Checks and maintenance

In this video we can see how to install the French "telepeage" badge on our car: it must be installed on the windshield, in the unobstructed part, so on the part covered by black dots, at the level of the rearview mirror, in the center of the vehicle. Clean the area where the sticker will be applied well and then remove the support bracket protection, to which we will apply the electronic toll payment device. Make sure the sticker has adhered well before installing the device, and slide it until you hear a clear "click". To remove it, do the opposite maneuver, holding the support with your hand.

Posted on 27 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the Swiss highway toll sticker from the windshield
(Various brands) Various Today we will briefly explain how to remove the Swiss highway badge from the car windshield. This operation is quite simple and quick to perform inde…
How to Install the Atoto F7 XE Car Radio?
How to Install the Atoto F7 XE Car Radio?
(Various brands) Various In this guide, learn how to install the ATOTO F7 XE car radio in your vehicle and how to use it correctly, as the second part of the video illustrate…
How is a tire sensor made and where is it installed?
How is a tire sensor made and where is it installed?
(Various brands) Various If we don't know how a tire sensor (TPMS) is made and where it is installed, this video shows us. What we see is indeed a direct TPMS, the most commo…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos