Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to repaint a damaged bumper

Model: (Various brands) Various
Part: Body

In this video we can see how to restore a bumper that has suffered slight damage; we start by sanding it with not too aggressive paper, in order to level the plastic as much as possible: We start with a 240, then we apply polyester body filler (trying to use as little as possible), and finish with a 320 when it is dry. We widen with a 600 and mask where it is not needed, to apply primer on the parts to be repainted, giving a light coat. Then we give a light coat with wet 600: with a light pad, we also pass on the painted part, to degrease, then a pass of silicone remover. We apply a first coat of adhesion, then when it is dry we apply the second, and then we apply the clear coat all over: the third coat is used to polish well.

Posted on 9 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Repair a Car Bumper
How to Repair a Car Bumper
(Various brands) Various The author of the video demonstrates and explains how to repair a damaged bumper. The steps to follow are simple but require time between each to all…
How to repair a bumper by yourself
How to repair a bumper by yourself
(Various brands) Various In this video, we can see how to repair a rear bumper by ourselves: it is a valid system for all cars. First, we need to remove the damaged bumper an…
How to Repair Your Car's Bumper Independently
How to Repair Your Car's Bumper Independently
(Various brands) Various Repairing the rear bumper of a car independently is possible and easy with our video tutorial and guide. Start by removing the bumper; first, open th…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos