Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Pontiac Fiero Door Panel

Model: (Various brands) Various
Part: Door trim panel

There are 5 screws securing the door panel, two near the internal opening lever and three along the edges of the internal handle.
Near the internal opening lever, first remove the screw cover caps: one just behind the lever (which has the emblem) and the other inside the lever's housing. Once the caps are carefully removed to avoid damage, you can unscrew the screws, disconnect the lock switch, and remove the frame of the opening lever.
Also, near the handle grip, there is a square-shaped cap that must be removed to access the screw; the other two screws are located inside the designated holes at the bottom of the handle.
Once all screws are removed, disengage the pressure clips located along the edges of the panel and pull it upwards to detach it from the window seal.

Updated on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box of the 1998 Pontiac Sunfire
Where to Find the Fuse Box of the 1998 Pontiac Sunfire
(Various brands) Various Thanks to this new mini guide, all of you with a 1998 Pontiac Sunfire will be able to find the fuse box containing all the various fuses in seconds. …
Where to Find the Engine Fuse Box on a Pontiac G6
Where to Find the Engine Fuse Box on a Pontiac G6
(Various brands) Various In the following guide, you will find a brief and useful description that allows you to access the engine fuse box of your Pontiac G6. First, ensure …
How to Replace the Key Battery on the Pontiac Montana
How to Replace the Key Battery on the Pontiac Montana
(Various brands) Various With this guide dedicated to all Pontiac Montana owners (2005-2008), you will discover how to replace the battery located inside the key. The entire …

    Frequently Asked Questions

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos