Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What to do when our car indicates a low level of urea

Model: (Various brands) Various
Part: Instrument cluster

Video tutorial

What happens if the urea light on our car's instrument panel comes on? This means that the level of the additive has decreased: we recommend not letting this level drop too low, as a too low level of AdBlue promotes crystallization inside the tank; we also recommend not opting for products that are too cheap, as the poor quality of the product could damage the components of the system.

Once the additive has been obtained, we attach the funnel to the canister and proceed to fill the tank through the appropriate nozzle.

It is advisable to pour slowly, so as not to risk spilling the liquid on the bodywork. Usually, it is not necessary to reset; if you are not too close to the "stop" point of the vehicle, the light resets itself after a few kilometers of driving.


Posted on 2 March 2025 by ScegliAuto


Related tutorials

What to do when our dashboard says "engine malfunction, repair necessary
What to do when our dashboard says "engine malfunction, repair necessary
(Various brands) Various What should we do when our instrument panel shows the dreaded phrase "engine malfunction, repair necessary"? It is an error that appears on most cars…
What damages the 12Volt battery?
What damages the 12Volt battery?
(Various brands) Various What damages the 12 Volt battery of our car? We all believe it is the low temperatures. Instead, it is excessive heat. If during the crazy months of …
What to Do If You Run Out of AdBlue
What to Do If You Run Out of AdBlue
(Various brands) Various In this video, our YouTuber gives some advice on what to do if you run out of AdBlue: first, DO NOT turn off the engine as this will prevent the syst…

    Frequently Asked Questions

    • Vari - How does the oil pressure sensor 1.6 HDI position work? Read answer
    • Vari - How to set the time on Piaggio Medley? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos