Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the car radio in Citroen and Peugeot vehicles

Model: (Various brands) Various
Part: Car stereo

Removing the car radio on Citroen and Peugeot vehicles is a simple and quick operation to be carried out independently. To perform this operation, we need to use four small-sized cylinder screwdrivers. We then get on board the vehicle and with the instrument panel and radio turned off, we insert the four screwdrivers into the side holes of the four corners. We pull outwards and then remove the car radio, being careful not to damage the main connector that will need to be disconnected later. After disconnecting the connector, the car radio will be completely removed. To reintroduce the car radio into its housing, it will simply be necessary to connect the antenna cable, the main connector, and insert the radio by pushing it inwards.

Posted on 24 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on Peugeot and Citroen vehicles
How to reset the service light on Peugeot and Citroen vehicles
(Various brands) Various The steps to complete the service on Peugeot and Citroen vehicles are as follows: - turn on the instrument panel; - press the "000" button below the …
How to replace the headlight bulb on Peugeot and Citroen vehicles
How to replace the headlight bulb on Peugeot and Citroen vehicles
(Various brands) Various Replacing the right front headlight bulb on Peugeot and Citroen vehicles involves simple and quick steps that can be done independently. We open the …
How to reset the service light on Citroën and Peugeot vehicles
How to reset the service light on Citroën and Peugeot vehicles
(Various brands) Various The service light reset on Citroen and Peugeot vehicles is done by following the same steps. To reset the service light, we must: - keep the instrume…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos