Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of the Nice Era - Inti gate remote control

Model: (Various brands) Various
Part: Key

In this video we see how to change the battery of the Nice Era-inti gate remote control. This remote control allows us to open and close our electric gate or garage door conveniently from our vehicle, using an advanced encoding system (O-code 72 bit) that increases security and reduces the risk of interference. To change the battery, simply unscrew the small screw on the back of the remote control, remove the back cover and lever out the button battery that we can find inside. It is a common CR2032, which we can find for a few euros in any supermarket or electronics store; when repositioning it, pay attention to the polarity and then put the cover back in place, tightening the screw.

Posted on 3 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to program the Nice remote control
How to program the Nice remote control
(Various brands) Various Today we will explain how to program a gate remote control. To program a new Nice remote control, you need to use the "old" remote control. To carry …
How to replace the battery of the Nice Inti2 remote control
How to replace the battery of the Nice Inti2 remote control
(Various brands) Various In this video, we will see how to change the battery of the Nice Inti2 remote control, which is a device that allows you to remotely control the open…
How to replace the battery of the Nice Flor-s 2 key
How to replace the battery of the Nice Flor-s 2 key
(Various brands) Various Today we will explain how to replace the battery of the Nice Flor-s model 2 car remote control. To replace the key battery on your own, you need to o…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos