Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and installation of the central hood on a U10 CFMoto

Model: (Various brands) Various
Part: Body

Video tutorial

What is the U10 of CF Moto? It is a vehicle designed for agricultural and forestry work, but also suitable for off-road and leisure activities. It is defined as a "Utility Task Vehicle" (UTV). This vehicle does not have hinges to open the hood, so it must be completely removed, at least for the time being.

There are two tabs on the front, on which to lever, and three on the back of the hood, and when all five clips are loosened, the hood can be removed. When it is cold, the plastic material of which the hood is made hardens, so it is advisable to grease the clips, so that they remain well lubricated.

Putting it back in place is more difficult, because the side grooves must also match from both sides; it must therefore be inserted from below and then pushed upwards so that it fits perfectly.


Posted on 24 September 2025 by ScegliAuto


Related tutorials

How to install the Supereasy black box from UnipolSai?
(Various brands) Various To install the Supereasy black box from UnipolSai, open the bonnet to access the top of the battery. At this point, remove the adhesive from the back…
How to remove a sticker from the rear bumper of the car
How to remove a sticker from the rear bumper of the car
(Various brands) Various There are various methods to remove a sticker from a bumper, from a hair dryer to a heat gun, but today we will explain a faster and more effective m…
How to Install Android Auto on R-Link
How to Install Android Auto on R-Link
(Various brands) Various Learn how to install Android Auto on R-Link by mirroring what you have on your smartphone. First, select the aaad github from your device, where you …

    Frequently Asked Questions

    • Vari - How much does it cost to repaint the bonnet and roof? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos