Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the Supereasy black box from UnipolSai?

Model: (Various brands) Various
Part: Checks and maintenance

To install the Supereasy black box from UnipolSai, open the bonnet to access the top of the battery. At this point, remove the adhesive from the back of the black box and position it on top of the battery following the direction indicated by the arrow. Next, loosen the nuts on the positive and negative terminals so that the cables from the black box can be connected. Then, tighten the nuts again; at this point, close the bonnet and you will receive an SMS confirming the correct installation of the device.

Updated on 9 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Install the Supereasy UnipolSai GPS
(Various brands) Various This video tutorial shows how to install the Supereasy UnipolSai GPS in a car. You will need a spanner and the GPS module for installation. Lift the …
How to Install the Octo Telematics Black Box in Your Car
How to Install the Octo Telematics Black Box in Your Car
(Various brands) Various This guide shows how to install the Octo Telematics black box in your car. This operation does not require any special tools, just a spanner to loose…
Why Install a Black Box (or Unibox) in Your Vehicle
Why Install a Black Box (or Unibox) in Your Vehicle
(Various brands) Various The black box (or unibox, like those in aircraft) collects a variety of information about the use of the vehicle, all of which can be valuable for in…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos