Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Supereasy UnipolSai GPS

Model: (Various brands) Various

This video is currently unavailable

This video tutorial shows how to install the Supereasy UnipolSai GPS in a car. You will need a spanner and the GPS module for installation. Lift the bonnet and secure it with the prop rod; then locate the battery position.

Clean the area of the battery where the GPS will be placed and remove the adhesive from the back of the device. Proceed by placing the device on top of the battery, paying attention to the arrow indicating the direction of travel; using the spanner, loosen the nuts on the positive and negative terminals of the battery, then insert the appropriate cable and tighten the nuts.

Once completed, you will receive a text message confirming the successful installation of the device.


Updated on 16 June 2026 by ScegliAuto


Related tutorials

How to install the Supereasy black box from UnipolSai?
(Various brands) Various To install the Supereasy black box from UnipolSai, open the bonnet to access the top of the battery. At this point, remove the adhesive from the back…
How to Install a GPS Antenna on a Car?
How to Install a GPS Antenna on a Car?
(Various brands) Various This video tutorial explains how to install a GPS antenna on a car. The first step is to remove the vehicle's onboard computer by extracting it from …
Car Insurance with Black Box: Pros and Cons.
(Various brands) Various Through this video tutorial, we will understand how and when it is beneficial to install a black box in your vehicle. Like all devices, the black box…

    Frequently Asked Questions

    • Vari - Triangle Season X TA01 tyres: characteristics and opinions Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos