Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Octo Telematics Black Box in Your Car

Model: (Various brands) Various
Part: Engine

Video tutorial

This guide shows how to install the Octo Telematics black box in your car. This operation does not require any special tools, just a spanner to loosen the battery terminals. Open the bonnet and secure the hatch using the locking rod, then loosen the battery terminals with the spanner.

Clean the area where the black box will attach with a cloth. Insert the two plugs into their respective battery terminals and tighten them well.

Install the black box in the direction of travel of the vehicle, indicated by an arrow on the black box. Check the correct installation and close the bonnet.


Updated on 12 May 2026 by ScegliAuto


Related tutorials

How Can I Install the Octo Telematics Device in My Car?
How Can I Install the Octo Telematics Device in My Car?
(Various brands) Various To install the Octo Telematics electronic device in your car, first open the front bonnet. Start by loosening the positive and negative terminals of …
How to Install the Octo Telematics Device in a Vehicle
How to Install the Octo Telematics Device in a Vehicle
(Various brands) Various Before you begin, open the bonnet of your vehicle. Start by loosening the positive and negative terminals of the battery. Next, take the Octo Telemat…
How to Install Octo Super Easy Telematics
How to Install Octo Super Easy Telematics
(Various brands) Various In today's video, you will see how to install the Octo Super Easy satellite telematics device. First, it is advisable to work with the vehicle cold a…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos