Do it yourself
Frequently asked questions about cars and motorcycles

We warn against miraculous products that can damage our air conditioning system.

Model: (Various brands) Various
Part: Air conditioner

Video tutorial

The procedure described in the video is extremely dangerous and highly discouraged: the product Cool-shot ultra is marketed as a miraculous fix for car air conditioning, but in reality it is a high viscosity sealing liquid. In theory, it should circulate and deposit in the micro leaks of the pipes and gaskets, sealing them and preventing the system from losing gas. In reality, this thick and sticky liquid clogs everything: it does not distinguish between a micro leak and the vital components of the system.

It is known by workshops as a plague because it destroys and contaminates the equipment. In the best case scenario, it temporarily solves the leak, creating the conditions for a much more expensive damage in the future, where the only solution becomes the complete replacement of the air conditioning system, with costs exceeding 1,000 euros.

The demonstration in the video is misleading; if the system was just empty, any added liquid that takes up space will increase the pressure and cool more. This does not prove that the product is used to restore anything, but only that the system was low on pressure.


Posted on 2 October 2025 by ScegliAuto


Related tutorials

(Various brands) Various To check for a refrigerant gas leak in your vehicle's air conditioning system, follow the instructions provided below. For this test, you will need a…
(Various brands) Various To perfectly clean your car windows, you don't need special devices or miracle products that may cost a lot of money. You don't even need alcohol or …
(Various brands) Various In this video, you will learn the reasons for changing the timing chain on your vehicle. In some cases, timing chains can last up to 300,000 miles, b…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos